Career-ready: every configuration can turn up at private sellers and can be insured (commercial class).

Configurations:
3020 Diesel (default): 4.4 L four-cylinder, 71 PTO hp (Nebraska test 940), Syncro-Range 8 forward / 2 reverse, factory muffler.
3010 Diesel: 4.2 L, 59 PTO hp, galvanized straight stack.
3020 Diesel ROPS Canopy: two-post ROPS with the John Deere Roll-Gard canopy, curved chrome stack.
3020 Diesel Ballasted Workhorse: cast rear wheel weights, front suitcase weights, bar-lug rears, 7.50-16 fronts.
3020 Diesel with John Deere 148 Loader: the period John Deere loader with a 72 in bucket, rear wheel weights, ROPS, factory muffler.
3020 Diesel JD 148 Loader with Pallet Forks: pin-on pallet fork frame on the 148, and 42 in forks on the 3-point hitch.
3020 Diesel Duals and Stacked Weights: dual Firestone rears, two sets of cast weights, front weights.
3020 Diesel Farm Stock Puller (8,500 lb class): factory engine, tyres and drawbar, suitcase + wheel weights only.
3020 Hot Farm Puller (9,500 lb class): single-turbo engine (~300 hp, 3,000 rpm), tall open stack, 16.9-38 pulling tyres, front weight bracket with a front hitch, wheelie bars and an air-shutoff mast; 3-point hitch off.
3020 Gasoline: the 227 ci gas four (64 PTO hp, Nebraska test 851).
3020 LP Row-Crop, Roll-O-Matic Front: LP-gas engine (65 PTO hp, test 852) with the tank dome through the hood, on the Roll-O-Matic narrow dual front.
3020 Diesel Power Shift: the factory 8 forward / 4 reverse Power Shift, Roll-Gard canopy.
3020 Gasoline Power Shift, Single Front: single 7.50-16 front wheel on a fork.
3020 Diesel with 606 Rotary Cutter, Road Kit: JD 606 6 ft cutter on the 3-point, seat umbrella, SMV emblem and fender warning lamps.

Loader:
John Deere 148 (3.2 m to the pin, 38 deg dump), under “Front Loader” in the parts menu.
T/G: raise / lower the boom. K/I: dump / curl the bucket. Gamepad: hold modifier, right stick = lift, left stick = tilt.
Loader valve levers (right of the seat, ahead of the right fender, marked BOOM and BUCKET): they move with the controls, and you can work them with the mouse. Hold a click on a knob to pull the lever back (raise the boom/curl the bucket), Shift + click to push it forward (lower / dump).
The hydraulics run off the engine pump, so the loader moves faster at higher rpm (hand throttle up for work).
“Loader Attachment”: 72 in material bucket or the pin-on pallet fork frame (two 42 in tines, 48 in frame). Both pin onto the same two pins, so the tilt cylinders work the forks the same way.
“3-Point Attachment”: 42 in pallet forks on the hitch (they stay level as the hitch lifts), or the John Deere 606 rotary cutter (below).

John Deere 606 rotary cutter:
6 ft cut, swivel tail wheel, driveline from the rear PTO. ‘O’ turns the PTO on: the blade spins up to about 890 rpm through the gearbox (and coasts down when you turn it off). Raise it with the hitch (Y / U) to turn.

Tractor pulling:
Hook the sled chain to the drawbar pin (0.49 m high, 0.65 m behind the axle on the pulling tyres – inside the usual 20 in / 18 in rules).
“Pulling Kit” slot: wheelie bars + air-shutoff mast (take the 3-point hitch off first, the lower links sit there).
“Front Weights” slot: factory suitcase weights or the pulling bracket with its own front hitch.
Class weights include an 80 kg driver.

John Deere 3020/3010 Tractor BeamNG mod configurations list:
3010 Diesel, 3020 Gasoline Power Shift, Single Front, 3020 Gasoline, 3020 LP Row-Crop, Roll-O-Matic Front, 3020 Diesel, 3020 Diesel Ballasted Workhorse, 3020 Diesel ROPS Canopy, 3020 Diesel with 606 Rotary Cutter, Road Kit, 3020 Diesel Power Shift, 3020 Diesel Duals and Stacked Weights, 3020 Diesel Farm Stock Puller (8,500 lb class), 3020 Diesel JD 148 Loader with Pallet Forks, 3020 Diesel with John Deere 148 Loader, 3020 Hot Farm Puller (9,500 lb class)

Authors: Grade8.

Game Version: BeamNG.Drive 0.40.5.0.302427